Unipress 1000 C

Full-automatic Electrical press for inserting press-fit connectors in backplanes and daughterboards.
The insertion spindel is driven by a electrical servo motor, which guarantees a very accurate position and can press up to 50 kN.

A force/distance control system controls the insertion cycle, checks for errors and guarantees the the connector is against the board after the insertion.

How to work:

• The operator must place all connectors on the board by hand.
• The board with connectors is placed in the machine and the door is closed.
• After pressing start, the machine positions the board in the X and Y directions and inserts the connector.
• The machine positions and inserts all connectors and waits then until the operator has removed the board from the machine and inserts a newly prepared board.

Features:

• Single head press which allows a maximum insertion force of 50 kN. The insertion spindle is driven by means of an electrical motor.
• The machine can insert in different strokes to insert a connector.
• Maximum press stroke: 60 mm.
• After each insertion cycle, the machine checks if the maximum insertion force lies within the programmed window of success.
• A graphical editor which allows a flexible updating of the pattern programs is provided.
• In order to cope with board thickness and finished hole diameter tolerances, UNIPRESS 1000C is equipped with an state-of-the-art closed loop insertion system.
• In order to secure the quality, the controller measures the insertion force during each insertion cycle. In case the insertion force is out of the programmed range, the system gives a “Force error”.

Options:

• Anvils and insertion blades for several press-fit connectors. More info: Insert block and anvils.
• Bar code reader, for traceability.
• Statistic process control
• Motor driven rotating heads.